Filter
Top Products
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
60 Installation Manual
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot card type to be installed to "DHLC", "HLC", "SLC", "ESLC", or "SLC-
M" SLT interface supports.
c)
Click "Apply" to save the slot card type assignment.
d)
Set "Card Status" to "INS".
Screen output:
2.
Assignment of the extension ports to be connected to the VPS
a)
Go to the "1-3 Extension Port Assignment" screen.
b)
Assign "Attribute" of the port to be connected to "TEL" (default).
c)
Assign "DN" for the port (click "DN Refer" to check the available directory numbers).
Note:
This programme allows you to assign an extension number to each Voice Mail
port. To reach the Voice Mail system, users dial these extension numbers.
d)
Assign "Extension Group No." for the port.
Note:
Specify the extension group number (126 or 127 by default) to which VM or AA
extension groups have been assigned. Group numbers 1 to 128 are available
to the VPS through additional programming.
e)
Click "Apply" to save the changed data.
f)
Set "Port Status" to "INS".