Filter
Top Products
Beaming problems
391
Beaming problems
Recharging problems
Problem Solution
I cannot beam data to another
device with an IR port.
■ If you are beaming to another Palm handheld, confirm that
your handheld and the other handheld are between ten
centimeters (approximately 4") and one meter
(approximately 39") apart, and that the path between the
two handhelds is clear of obstacles. Beaming distance to
other devices with an IR port may be different.
■ Move your handheld closer to the receiving device.
When someone beams data to
my handheld, I get a message
telling me it is out of memory.
■ Your handheld requires at least twice the amount of
memory available as the data you are receiving. For
example, if you are receiving a 30KB application, you must
have at least 60KB free.
■ Perform a soft reset. See “Performing a soft reset” in
Appendix A for more information.
Problem Solution
When I place my handheld in
the cradle, the indicator light
does not go on.
■ Confirm that your handheld is well seated in the cradle.
■ Confirm that your recharger cable is properly connected to
the back of the cradle’s USB or serial port connector that
plugs into your computer.
■ Confirm that your recharger is plugged into an AC outlet
that has power.
■ If you have not used your handheld for a long period, such
as an extended vacation, the battery may not contain
enough charge to power the indicator light. After your
handheld has recharged, the indicator light will function
normally.