Filter
Top Products
Going beyond the basics
239
4. Press Function + Enter , or tap OK.
If you are using the Palm VersaMail HotSync Conduit and have an IMAP
account, you must configure the outgoing mail settings to send mail.
To set outgoing mail server (SMTP) settings:
1. In the Server Settings screen, tap Details.
2. Tap the Options pick list and select Outgoing Mail.
3. Enter any of the following:
–
Display Name: Enter the name you want to appear on your outgoing
messages, such as “Joe Smith.”
–
Reply To Address: Enter the e-mail address that you want recipients to see
and reply to on your e-mail messages, only if it is different from the e-mail
address from which you are sending the message. For example, if you are
sending a message from me@yahoo.com but you want recipients to reply to
me@earthlink.net, enter the reply-to address here. Reply To Address makes
it look like the e-mail came from the address you entered.
–
BCC: Select the BCC check box to send a blind copy of any e-mail message
you send to another e-mail address. The blind copy e-mail address is not
seen by the other recipients of the message. For example, if you want a copy
of all messages you send from your handheld to be sent to your desktop e-
mail account, enter that e-mail address.
Mailbox (IMAP
only)
Defines the root mailbox on your IMAP server.
Deleted Mail
(IMAP only)
Stores deleted e-mail in the folder you specify on the server.
This field is case sensitive, so spell the folder name exactly as
it is on the server. For example, if your Deleted Mail folder is
called Trash on the server, you must enter Trash in this space.
Sent Mail (IMAP
only)
Shows the name of your Sent Mail folder on the server. This
field is case sensitive, and the folder name should be spelled
exactly as it is on the server
.