Filter
Top Products
Chapter 20 Performing HotSync
®
Operations
296
Conducting HotSync operations using an attached modem
You can use your attached modem to synchronize your handheld when you are
away from your computer.
IMPORTANT
You cannot perform a wireless HotSync operation using your
handheld’s mobile radio.
The first HotSync operation must be performed using a local, direct connection, or
with infrared communication. After that, you can perform a HotSync operation using
an attached modem.
To perform a HotSync operation using your attached modem you need the
following:
■ A modem connected to your computer.
■ Palm Desktop software configured for use with the modem.
■ A modem connected to your handheld.
■ A configuration for the kind of modem connection you want to make.
See “Connection preferences” in Chapter 21 for more information.
Preparing your computer for a modem HotSync operation
There are a few steps you must perform to prepare your computer for a modem
HotSync operation. Be sure to perform these steps before you leave your office so
that your computer is ready to receive a call from your handheld.
To prepare your Windows computer for a modem HotSync operation:
1. Confirm that the computer modem is connected and turned on, and that no
communications applications, such as fax or telephony software, are running
on a COM port.
Make sure the computer is disconnected from all online services, such as
America Online (AOL). This helps to avoid conflicts with the COM port.
2. Start HotSync Manager if it is not already running, and from the HotSync
Manager menu, select Modem.