Filter
Top Products
Appendix A Maintaining Your Handheld
374
Installing and removing the SIM card
With the SIM card installed, you can use your handheld’s wireless features, such
as the mobile phone, SMS, and wireless e-mail. Without the SIM card, you can
operate your handheld, but you cannot use the wireless features.
If you have not installed your SIM Card, see the Getting Started that came with your
handheld or use the following instructions. Most likely, the SIM card either is in
your package or was handed to you by a representative of your wireless service
provider. In some cases the SIM card is already installed in your handheld by your
wireless service provider.
IMPORTANT
If you are sending in your handheld for service to Palm, you must
remove the SIM card before sending in your handheld. Use the following instructions
if you need to exchange or remove the SIM card.
To install the SIM card or verify installation:
1. If you have the SIM card attached to its plastic holder, carefully detach the SIM
card from the holder.
2. On the back panel of your handheld, slide a thin, flat edge (similar to your
thumb nail) in the indent and under the access door until the access door is
released.