Filter
Top Products
84 Chapter 7 Off-premise Message Notification
P0605665 03
Assigning an outdial method to a skillset mailbox
The outdial method determines which line, line pool or route code the system uses for Off-premise
Message Notification.
The default for outdial method is None. You must assign an outdial method before you can use an
external telephone or a pager as an Off-premise Message Notification destination.
For more information on line pools and route codes, refer to your system documentation.
To assign an outdial method to a skillset mailbox
1 Start CallPilot Manager.
2 Click the Mailbox Administration heading.
The Mailbox List page appears.
3 Click the Change link for the skillset mailbox you want to set up an outdial route for.
The Mailbox page for the mailbox appears.
4 From the Outdial Type list box select the type of outdial method you want to use.
5 If you use a line or a line pool, in the Line/Pool# type the number of the outgoing line or line
pool number you want to assign to the skillset mailbox for outdialing.
6 Click the Submit button.
Warning: Do not change the extension number assigned to the skillset mailbox. If this
extension number is changed, callers in the skillset cannot access the skillset mailbox
and you cannot change the Skillset general parameters.
To correct a wrong extension number, change the extension number to the Control DN
of the skillset.