Filter
Top Products
58 Chapter 5 Setting up skillsets
P0605665 03
Enabling a skillset
After you set up a skillset, the skillset is disabled until you enable it.
Before you can enable a skillset you must:
• set up the skillset with a valid Control DN.
For information, refer to “Setting up or changing a skillset” on page 46.
• initialize the skillset mailbox.
For information, refer to “Initializing a skillset mailbox” on page 63.
• record skillset mailbox greetings.
For information, refer to “Recording skillset mailbox greetings” on page 68.
• set up the Day and Night Routing Tables.
For information, refer to “Example of a Day Routing Table” on page 149.
To enable a skillset
1 Start CallPilot Manager.
2 Click the Call Center heading.
3 Click the Skillset List link.
The Skillset List page appears.
4 Click the Enable link for the skillset to you want to enable.
On the Skillset List page in the Status column the skillset changes from Disabled to Enabled.
A message appears that says what Service Mode the skillset is in.
Note: After you enable a skillset it is automatically in 24 hour mode. To change the
Service Mode of a skillset, refer to
“Setting the Service Mode for skillsets” on page 147.