Filter
Top Products
116 Chapter 9 Setting up Intelligent Routing
P0605665 03
Mode
Intelligent Overflow Routing looks at the mode the skillset is in to determine how to handle a call.
A skillset can be in Day mode, Night mode, or 24 Hour Service. Each mode can have its own rules
for how to handle calls. The default mode is Day.
Condition
After Intelligent Overflow Routing determines what mode the skillset is in, Intelligent Overflow
Routing determines what conditions apply to the call. The two possible conditions are:
• Whether the timer expires. You set the length of time a call waits for an agent before the call is
sent to the destination that you specify. The maximum time a call can wait is 59:59. When a
call enters a skillset, the timer starts at 00:00. Overflow rules are applied according to the time
a call is in a skillset, not according to the total time a call is in the system. For example, if you
set up skillset 1 to move a call to skillset 2 after five minutes, and you set up skillset 2 to move
a call to skillset 1 after two minutes, a call in skillset 1 will be moved to skillset 2 after five
minutes. The call will move back to skillset 1 after an additional two minutes, then back to
skillset 2 after an additional five minutes.
• Whether there are agents logged on to the skillset. If there are no agents logged on to the
skillset, the call is sent to the destination that you specify. If you select the Agents Not Logged
In check box, the overflow rule applies if there are no agents logged on to the skillset. If you
do not select the Agents Not Logged In check box, the overflow rule applies if there are agents
logged on to the skillset.
Action
When Intelligent Overflow Routing determines that a condition is met for the call, the call goes to
the destination you specify. Possible actions are:
• moving the call to a new skillset.
The caller hears the greetings for the new skillset.
• overflowing the call to one or more skillsets.
The caller continues to hear the greetings from the original skillset.
• sending the call to the skillset mailbox
• transferring the call to an extension, external number, mailbox, skillset mailbox, Automated
Attendant, CCR Tree or operator
• changing the priority of the call
Note: You can select both conditions within the same rule. The rule applies when both
conditions are met.
Note: Note: if an overflow step is configured for No Agents, the overflow rule executes
right away, and even a forced greeting will not play. If you want to play the greeting,
configure a timer with the No Agents rule.