Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 306 (Page 1 of 1)
MMC: 306 HOT LINE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows a station to make an automatic internal or external call upon the expiration of a timer (see
MMC 501, System-Wide Timers: ‘Off-Hook Select Timer’ option) to a predetermined number
when the handset is lifted. The number can be a maximum of 18 digits including pauses, flash
etc., in the dial string (the access code for a trunk is not counted).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
“B” Used to insert a flash code “F”
”C” Used to insert a pause code “P”
”D” Used to insert a pulse/tone conversion code “C”
”E” Used to mask/unmask following digits (shows as “[” or “]”)
Keys “A” to “F” are keys #19 to #24 on 24B keysets, or keys #7 to #12 on 12B keysets, or keys
#1 to #6 on 6B keysets.
ACTION DISPLAY
1. Open programming and select 306
Display shows
Press RIGHT soft key to advance cursor
[2
01] HOT LINE
NONE
2. Enter station number via dial keypad (e.g. 201)
OR
Press UP or DOWN to make selection and press RIGHT
soft key
[201] HOT LINE
NONE
2. Enter station number to automatically dial via keypad
(e.g. 202)—or press UP or DOWN to select
OR
[201] HOT LINE
202
Enter a trunk to automatically dial (e.g. 701)—or press UP
or DOWN to select—then press the RIGHT soft key and
enter a maximum of 18 digits to dial.
[201] HOT LINE
701-01235987654_
3. Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: NONE
Related Items: MMC 501 System-Wide Timers (Off-Hook Select Timer)