Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 803 [DCS] (Page 1 of 1)
MMC: 803 ASSIGN TENANT GROUP
DCS
33
CI
77
CII
77
816
77
408i
77
408
77
Allows the assignment of DCS tenant groups on a per-cabinet, slot and port basis. The simple
rule is Cabinet-Slot-Port=Tenant. The simplicity of this program allows for flexible assignments.
The only information needed is the correct correlation of entries.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Open programming and select 803
Display shows
TENANT GROUP
C:1 S:1 P:01 T:1
2. Enter cabinet (C) number (if no change, press RIGHT
soft key to move cursor)
TENANT GROUP
C:1 S:1 P:01 T:1
3. Enter slot (S) number (if no change, press RIGHT
soft key to move cursor)
TENANT GROUP
C:1 S:1 P:01 T:1
4. Enter port (P) number (if no change, press RIGHT
soft key to move cursor)
TENANT GROUP
C:1 S:1 P:01 T:1
5. Enter tenant (T) number (if no change, press RIGHT
soft key to return to step 2)
TENANT GROUP
C:1 S:1 P:01 T:1
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: All assignments tenant 1
Related Items: Tenant group