Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 726 (Page 2 of 3)
TONES
0. DIAL TONE
1. BUSY TONE
2. RINGBACK TONE
3. DND NO MORE
4. HDSET ANSWER
5. SPKER ANSWER
Note: The call progress tones will automatically be set to the default values if the SMDI VMS SET option in
MMC 210 is turned on.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used in some fields where a value is entered or deleted.
“A” Used to input alpha character "A"
”B” Used to insert alpha character "B"
”C” Used to insert alpha character "C"
Keys “A”–“F” are keys #19–24 (24B keysets) or keys #7–12 (12B keysets) or keys #1–6 (6B
keysets)
ACTION DISPLAY
1. Open programming and select 726
Display shows
EXT FOR DN1
YES
2. Enter the option number from above list (e.g., 4
— for other options, see steps 4–11)
SEPARATOR
NO
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
3. Enter 1 for YES or 0 for NO
OR
SEPARATOR
YES
Press UP or DOWN key for selection
Press RIGHT soft key to return to step 2
4. If option 0 is selected at step 2
EXT FOR DN1
YES
5. If option 1 is selected at step 2
TRK FOR DN1
YES
6. If option 2 is selected at step 2
EXT FOR DN2
NO
7. If option 3 is selected at step 2
TRK FOR DN2
NO