Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 404 (Page 1 of 1)
MMC: 404 TRUNK NAME
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows a name, up to 11 characters, to be entered to identify an individual trunk.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is “TELECOMS”, press the number “8” once to get
the letter “T”. Now press the number “3” twice to get the letter “E.” Continue selecting characters
from the keypad to complete the name. Press the programmable “A” key to toggle between up-
per and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options/move cursor left or right
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper case and lower case text.
ACTION DISPLAY
1. Open programming and select 404
Display shows
[7
01] TRUNK NAME
2. Dial trunk (e.g., 704)
OR
Press UP or DOWN to select trunk and press the
RIGHT soft key to move the cursor
[704] TRUNK NAME
_
3. Enter trunk name using the procedure described
above
Press RIGHT soft key to return to step 2
[704] TRUNK NAME
TELECOMS
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: No names entered
Related Items: MMC 104 Station Name
MMC 405 Trunk Number