Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 219 [Compact II / 816] (Page 1 of 1)
MMC: 219 COMMON RELAY SERVICE
TYPE
DCS
77
CI
77
CII
33
816
33
408i
33
408
33
This MMC is used to define the function of :
• three common relays in the Compact II MISC card (363–365), or
• the common relay in the 816 base board (362), or
• the common relay in the 408/408i base board (361).
Each relay can be used for one of the following:
0 EXTERNAL PAGE
1 COMMON BELL
2 LOUD BELL
3 NOT USE
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Open programming and select 219
Display shows (e.g. 363)
[363]RELAY TYPE
EXTERNAL PAGE
2.
Compact II only – dial relay number (e.g. 364)
OR
Use UP or DOWN to scroll through numbers and
press RIGHT soft key to move cursor
816/408/408i – press RIGHT soft key to move cursor
[364]RELAY TYPE
EXTERNAL PAGE
3. Dial relay function 0–3 (see table above)
OR
Press UP or DOWN to scroll through options
and press RIGHT soft key
[364]RELAY TYPE
LOUD BELL
4.
Compact II only–Repeat step 2 for next relay
[364]RELAY TYPE
NOT USE
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: EXTERNAL PAGE
Related Items: MMC 203 Assign UA Device
MMC 204 Common Bell Control
MMC 205 Assign Loud Bell
MMC 605 Assign External Page Zone