Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 428 (Page 1 of 1 )
MMC: 428
ASSIGN TRUNK / TRUNK USE
DCS
33
CI
77
CII
33
816
33
408i
77
408
77
Used to control whether an incoming trunk can dial calls for specific trunks. (In the following ex-
ample, you don’t want trunk 705 to dial calls for 708.)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 428
Display shows
[7
01] USE [702]
DIAL:YES
2. Dial the incoming trunk number (e.g., 705)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
OR
Press ANS/RLS to select all trunks
[705] USE [7
02]
DIAL:YES
3. Dial the trunk number (e.g., 708)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
[705] USE [708]
DIAL:YES
4. Dial 1 for YES or 0 for NO
OR
Press UP or DOWN key to select YES/NO and press
RIGHT soft key
[705] USE [708]
DIAL:NO
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: DIAL=YES
Related Items: None