Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 711 (Page 1 of 2)
MMC: 711 LCR TIME TABLE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
This table gives flexibility to the system, through the LCR ROUTES, to allow calls placed at any
given time of day to use the least cost trunk route that is available. When LCR ROUTE ADVANCE
is allowed, it is possible for calls to be placed on more expensive trunks on any given time of
day. There are four possible time entries per day; the start time of the next time period is the end
time of the previous time period.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
FEATURE KEYS
DAY DIAL TIME
BAND
DIAL LCRT DIAL
SUN 0 A 0 LCRT 1
MON 1 B 1 LCRT 2
TUE 2 C 2 LCRT 3
WED 3 D 3 LCRT 4
THU 4
FRI 5
SAT 6
ACTION DISPLAY
1. Open programming and select 711
Display shows
LCR TIME (S
UN:A)
HHMM: 0000 LCRT:1
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press UP or DOWN to make day selection and press
RIGHT soft key
LCR TIME (W
ED:A)
HHMM: 0000 LCRT:1
3. Dial time band (A–D, e.g., B)
OR
Press UP or DOWN to make selection and press RIGHT
soft key
LCR TIME (WED:B)
HHMM: 0000 LCRT:1
4. Dial time via keypad (24-hour clock format, e.g. 0800)
Cursor moves to LCRT
LCR TIME (WED:B)
HHMM:0800 LCRT:1
5. Dial entry 1–4
OR
Press UP or DOWN to select entry and press RIGHT
soft key
LCR TIME (WED:B)
HHMM:0800 LCRT:2