Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 500 (Page 1 of 2)
MMC: 500 SYSTEM-WIDE COUNTERS
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Used to set the values of the system counters. The counters are listed below with a brief descrip-
tion of each.
DIAL COUNTER DESCRIPTION
0 ALARM REMINDER The number of times that an alarm reminder will ring a station
before cancelling. RANGE = 1–99.
1 AUTO REDIAL The number of times the system will redial an outside number
after the auto redial feature has been activated. RANGE = 1–15.
2 DISA CALL Sets the maximum number of internal calls that can be made
after accessing a DISA line. RANGE = 1–99.
3 DISA LOCK Number of attempts the system will allow to incorrectly access a
DISA line before locking out the DISA line. RANGE = 1–99.
4 NEW CALL Number of times the system will allow a user to signal New Call
on a C.O. line during one call. RANGE = 1–99.
5 UCDS VISUAL
ALARM*
Used to set the Visual Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25.
6 UCDS AUDIO
ALARM*
Used to set the Audio Alarm threshold. It is triggered when the
number of calls waiting to be answered in the UCD group
reaches this value. RANGE = 0–25
7 UCD CS LEVEL 1* Provides call wait indication level 1 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
8 UCD CS LEVEL 2* Provides call wait indication level 2 if number of calls waiting to
be answered in UCD group reaches this value. RANGE = 0–25.
* Options 5–8 are not available on 408/408i systems.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL