Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 501 (Page 4 of 6)
CLIP DISPLAY: The amount of time that the Calling Line ID information remains on the keyset’s dis-
play. While on a trunk conversation, users are allowed to review received CLIP by pressing SCROLL
à CLIP soft key, but LCD will automatically go back to trunk conversation status on expiration of this
timer.
CLIP MSG RECEIVE: The amount of time that the system will allow a valid message from the C.O.
C.O. CLEAR: The length of time a Direct Trunk Select key remains busy after cleardown.
CO CONFIRM: After this time, the outgoing call is disconnected or you can hear the confirm tone.
C.O.- C.O. DISCONNECT: Monitors the duration of an unsupervised conference; when it expires,
both trunks are disconnected.
CONFER TONE INT: Controls the intervals between the tones heard by the parties in a conference.
CONFIRM TONE: The tone heard when a feature is activated or deactivated.
CRD TONE INT: Controls the interval of the intermittent tone presented to station users whose calls
are being recorded using the Auto Record feature (see CADENCE documentation).
DIAL PASS: The wait time for preventing the misdialling of an outgoing call. After the last digit has
been dialled, the voice path is connected.
DISA DISCONNECT: Controls the maximum duration of a DISA call.
DISA LOCK OUT: Controls the time period for which a DISA call is not allowed to be made after the
DISA error counter has expired (MMC 500).
DISA NOANS DISC: Controls the time period after which a DISA call is disconnected if the call is not
answered.
DISA PASS CHECK: Defines the time period before the system clears the incorrect passcode
counter.
DISPLAY DELAY: Controls how long information is shown in the LCD. This timer also controls how
long error tone is heard.
DOOR LOCK RELEASE: Controls how long the door lock relay is activated.
DOOR RING DETECT: Controls the period of time before a call is answered by the door phone.
DOOR RING OFF: Controls the duration of ringing at the door ring destination before automatically
cancelling.
E-HOLD RECALL: Controls how long a call is held exclusively at a station before recalling. See ATT
Recall Time.
EXT. FWD DELAY: Controls the External Call Forward feature which allows a station to ring before
the call is placed on external call forwarding.
FIRST DIGIT: Controls how long the system will wait for dialling to begin before dropping the dial
tone and returning the user to error tone.
HOK FLASH MAX: Monitors the duration of a hookswitch flash to ensure that the flash is valid and
not a line noise or an accidental hookswitch bounce (LONGEST DURATION).