Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 725 (Page 2 of 3)
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper and lower case text.
Exa mple 1: Switching options on (yes=print) or off (no=do not print)
ACTION DISPLAY
1. Open programming and select 725
Display shows
PAGE HEADER
PRINT : YES
2. Dial the option number (e.g. 00)
OR
Use the UP and DOWN keys to scroll through
options and press RIGHT soft key
PAGE HEADER
PRINT : YES
3. Use the UP and DOWN keys to select YES or NO
and press the RIGHT soft key to save
the data and return to step 2
PAGE HEADER
PRINT : NO
4. After all desired options have been selected and set,
press TRSF to exit
OR
Press SPEAKER to exit and advance to next MMC
Example 2: Changing no. of lines per page
ACTION DISPLAY
1. Open programming and select 725
Display shows
PAGE HEADER
PRINT : YES
2. Dial the option number 01
OR
Use the UP and DOWN keys to select and press
RIGHT soft key
LINE PER PAGE
66 LINE / PAGE
3. Enter the number of lines per page in the range 01–99
(e.g., 50)
OR
Use the UP and DOWN keys to change the
number of lines and press the RIGHT soft key to save
the data and return to step 2
LINE PER PAGE
50 LINE / PAGE