Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 211 (Page 1 of 1)
MMC: 211 DOOR RING ASSIGNMENT
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Designates which devices will ring when a doorphone button is pressed for both day and night
mode. Two types of device can ring: station and station group; these are listed below with their
default directory numbers.
DEFAULT DIRECTORY NUMBER DEVICE
DCS Compact II 816 408/408i
Station 201–349 201–308 201–216 21–28
Station group 500–529 500–519 500–509 50–53
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Clears previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 211
Display shows first doorphone
(If there is no doorphone interface module, you
see “DOOR NOT EXIST”)
[2
01] DOOR RING
D:500 N:500
2. Dial doorphone number (e.g., 210)
OR
Press UP or DOWN to scroll through
doorphone numbers and use the RIGHT
soft key to move cursor
OR
Press ANS/RLS to select all door ring
[210] DOOR RING
D:500 N:500
[ALL] DOOR RING
D:500 N:500
3. Enter new DAY selection via dial keypad (e.g. 301)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key
[210] DOOR RING
D:301 N:500
4. Enter new NIGHT selection via dial keypad (e.g. 302)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key
[210] DOOR RING
D:301 N:302
5. Press RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3
OR
Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: Station group 500 for day and night (group 50 for 408/408i systems)
Related Items: None