Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 604 (Page 1 of 1)
MMC: 604 ASSIGN STATION TO
PAGE ZONE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the assignment of a keyset to any of the internal paging zones 1 to 4 and All page (page
plus ∗). The total number of keysets that can receive a page is limited to 80 (DCS) or 40 (Com-
pact II) or 12 (816) or 4 (408/408i). A keyset may be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as “1” in a zone
column, it will receive pages for that zone. If the keyset is flagged as “0,” it will not receive pages
for that zone. Keysets can receive pages for more than one zone.
Note: 408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can be
flagged as “1”. Zones 3 and 4 are flagged as “0.”
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
ACTION DISPLAY
1. Open programming and select 604
Display shows
ENTRY:STN :1234∗
01:NONE:00001
2. Enter index number (01–80 or 01–40 or 01–12 or 1–4
depending on your system–see above) via keypad
(e.g., 04)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
ENTRY:STN :1234∗
04:NONE:00001
3. Enter station number (e.g., 205) via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
ENTRY:STN :1234∗
04:205 :00001
4. Move cursor under page zone desired (e.g. 2) by press-
ing UP or DOWN key and enter the digit 1 under the
zone
Press RIGHT soft key to return to step 2 to continue with
entries
ENTRY:STN :1234∗
04:205 :01001
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: No stations assigned
All zone is set (∗)
Related Items: None