Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 312 (Page 1 of 2)
MMC: 312 ALLOW CLIP
DCS
33
CI
33
CII
33
816
33
408i
33
408
77
Allows the system installer or administrator to:
§ allow or prevent receipt of CLIP data from the network
§ request or restrict sending of CLIP data to the network.
Each station can have the following options:
SND: YES - request the network to send Caller ID when outgoing call is made.
NO - request the network NOT to send Caller ID when outgoing call is made.
RCV: YES - allow display of CLIP data at keysets.
NO - prevent display of CLIP data at keysets.
INFO: If YES selected for SND option, you can select the CLIP display option from
0 CO Tel
1 Extn. Number
2 CO + Extn. No.
3 DID Number.
ACTION DISPLAY
1. Open programming and select 312
Display shows
[2
01] ALLOW CLIP
RCV:YES SND:YES
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press right
soft key to move cursor
OR
Press ANS/RLS to select all
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES
3. Dial 0 (NO) or 1 (YES) to select RCV option (e.g. 1)
OR
Press UP or DOWN to select option and press right
soft key to move cursor to SND field
[205] ALLOW CLIP
RCV:YES SND:YES
4. Dial 0 (NO) or 1 (YES) to select SND option (e.g. 1)
OR
Press UP or DOWN to select option and press right
soft key
[205] ALLOW CLIP
RCV:YES SND:YES
If you selected YES for SND option, display shows
Dial 0–3 to select INFO option
OR
Press UP or DOWN to select
Press RIGHT soft key
[205] ALLOW CLIP
INFO:C.O Tel.