Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 728 (Page 1 of 2)
MMC: 728 CLIP TRANSLATION TABLE
DCS
33
CI
33
CII
33
816
33
408i
33
408
77
Allows the system administrator or technician to associate a CLIP number received from the cen-
tral office with a name programmed in this translation table. If there is no match between a re-
ceived number and a name in this table, “no CLIP name” is displayed.
DCS – translation table consists of 250 entries, each comprising an 11-digit telephone number
and a 16-digit name.
Compact II and 816 – translation table consists of 200 entries, each comprising a 16-digit tele-
phone number and a 16-digit name.
408i – translation table consists of 100 entries, each comprising a 14-digit telephone number and
a 16-digit name.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is “SAM SMITH”, press the number “7” four times to
get the letter “S”. Now press the number “2” once to get the letter “A” Continue selecting charac-
ters from the keypad to complete your name. Press the programmable “A” key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper and lower case text.