Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 801 (Page 1 of 1)
MMC: 801 CHANGE TECHNICIAN
PASSCODE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Used to change the passcode which allows access to MMC 800 (Enable Technician Program)
from its current value.
Note: The passcode is four digits long. The current or “old” passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION DISPLAY
1. Open programming and select 801
TECH. PASSCODE
NEW CODE:_
2. Enter new passcode
TECH. PASSCODE
NEW CODE:∗∗∗∗
3. Enter new passcode again to verify
TECH. PASSCODE
VERIFY :∗∗∗∗
4. If verification is correct, press RIGHT soft key to con-
tinue and enter desired MMC
TECH. PASSCODE
VERIFY :SUCCESS
If verification is incorrect display shows “Failure”
and system returns to step 2
TECH. PASSCODE
VERIFY :FAILURE
5. Press TRSF to store and exit
OR
Press SPEAKER to advance to MMC
Default Data: Default passcode = 4321
Related Items: MMC 800 Enable Technician Program