Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 300 (Page 1 of 2)
MMC: 300 CUSTOMER ON/OFF PER
STATION
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the following features to be enabled on individual stations.
ACCESS DIAL Determines whether a user can select a trunk or trunk group by dial-
ling its directory number (DN). This selection should be turned OFF
when using LCR.
MICROPHONE Allows keyset to be used in speakerphone mode.
OFF-HOOK RING Allows a short burst of ring tone to indicate another call.
SMDR PRINT When this is set OFF, C.O. calls to and from the station will not print
on SMDR. This includes transferred calls or calls picked up from
hold or park.
TGR ADV.TONE When this feature is set to ON, a warning tone will be heard each
time LCR advances to the next route.
VMAA FORWARD When this feature is set to ON, it allows calls to be forwarded to
voice mail.
STN CALL PRT Allows print out of station to station call.
FWD DLY USE When this feature is set to ON, calls will overflow to Forward No An-
swer destination when the Forward No Answer timer expires even
when the Forward No Answer feature is not activated at the called
party extension.
Set Forward No Answer destination in MMC 102, Call Forward, but
do not enable the feature. (Alternatively, use code 603 plus the sta-
tion number, then code 600 to cancel the feature.)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL