Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 106 (Page 1 of 2)
MMC: 106
STATION SPEED DIAL NAME
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows a name, up to 11 characters, to be entered for each personal speed dial location. This
name enables the speed dial number to be located when the directory dial feature is used. The
directory dial feature allows the display keyset user to select a speed dial location by viewing its
name.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is “SAM SMITH”, press the number “7” four times to
get the letter “S”. Now press the number “2” once to get the letter “A” Continue selecting charac-
ters from the keypad to complete your name. Press the programmable “A” key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper and lower case text.
ACTION DISPLAY
1. Open programming and select 106
Display shows
[2
01] SPEED NAME
00:
2. Dial station number (e.g., 205)
OR
[205] SPEED NAME
00:
Press UP or DOWN to select station and press
RIGHT soft key to move cursor
If selected station has no speed dial bins, the display
will be as shown and a new station may be selected
[2
05] SPEED NAME
NO SPEED BLOCK
3. Dial speed dial location (e.g., 01)
OR
[205] SPEED NAME
01:_
Press UP or DOWN to scroll through location
numbers and press RIGHT soft key to move cursor
4. Enter the location name using the procedure
described above and press RIGHT soft key to
return to step 2
[205] SPEED NAME
01:SAM SMITH_