Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 811 (Page 1 of 1)
MMC: 811 RESET SYSTEM
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Provides two methods of restarting the system. The first method (CLEAR MEMORY) restarts the
system and clears all memory. The second method (RESET SYSTEM) restarts the system only. If
CLEAR MEMORY is selected, system data will return to default values.
Note: You do not need to enable system programming (MMC 800) in order to run this program but you will
still require the technician’s passcode.
WARNING: Extreme care should be taken when using this MMC
If the system is restarted, all voice/data connections are dropped.
If memory is cleared, all customer data is deleted and the system
returns to default status.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
ACTION DISPLAY
1. Open programming and select 811
Display shows
SYSTEM RESTART
RESET SYSTEM?NO
2. Press UP or DOWN key to make selection
(RESET SYSTEM or CLEAR MEMORY)
After selection is made, press RIGHT soft key to move
cursor to YES/NO option
SYSTEM RESTART
CLEAR MEMORY?NO
3. Press UP or DOWN key to make selection and press
RIGHT soft key
SYSTEM RESTART
CLEAR MEMORY?YES
4. Press UP or DOWN key to make selection and press
RIGHT soft key
Warning: Selecting CLEAR MEMORY will erase all
data in the system and return default values
SYSTEM RESTART
ARE YOU SURE?YES
If RESET SYSTEM is selected, system will return to nor-
mal programmed status
Default Data: None
Related Items: None