Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 802 (Page 1 of 1)
MMC: 802 CUSTOMER ACCESS
MMC NUMBER
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the installer to designate which MMCs the system administrator (customer) has access to.
For example, it is advised that the customer has access to MMC 102, Call Forward, for call for-
warding but it is not advised that the customer has access to MMC 710, LCR Digit Table, for LCR
dial plans. (MMC 802 is for both tenants on DCS systems.)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Open programming and select 802
Display shows
CUSTOMER ACCESS
100:STN LOCK:YES
DCS only -
Enter desired tenant number (1–2)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
CUSTOMER ACCESS
100:STN LOCK:YES
2. Enter desired MMC number (e.g. 102)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
CUSTOMER ACCESS
102:CALL FWD:YES
3. Enter 1 for YES or 0 for NO
OR
Press UP or DOWN key to make selection and press
LEFT soft key to return to step 3 to make additional en-
tries
CUSTOMER ACCESS
102:CALL FWD:NO
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Customers have access to the following MMCs (default = YES):
100–119, 201, 202, 209, 211–14, 216, 300–306, 308, 309, 312, 315, 317, 404–406, 408–410, 412,
414–416, 421, 500, 502, 505, 507, 508, 600–602, 604, 606, 607, 705–708, 714, 715, 720–722, 725,
727, 728.
Related Items: None