Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 602 (Page 1 of 1)
MMC: 602 STATION GROUP NAME
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system installer or administrator to enter a name, up to 11 characters, to identify an
individual station group. Names are written using the keypad. Pressing a key selects a character
and moves the cursor to the next position. For example, if the name is “SAMSUNG," press the
number “7” four times to get the letter “S.” Now press the number “2” once to get the letter “A.”
Continue selecting characters from the keypad to complete the name. Press the programmable
”A” key to toggle between upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper case and lower case text.
ACTION DISPLAY
1.
Open programming and select 602
Display shows
[5
01] SGR NAME
2. Dial group number (e.g., 505)
OR
Press UP or DOWN key to make selection and press
LEFT or RIGHT soft key to move cursor
[505] SGR NAME
_
3. Enter the name using method described above
[5
05] SGR NAME
SAMSUNG
4. Press LEFT or RIGHT soft key to return to step 2
OR
Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 104 Station Name
MMC 404 Trunk Name
MMC 600 Assign Operator Group
MMC 601 Assign Station Group