Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 103 (Page 1 of 1)
MMC: 103 SET ANSWER MODE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to change the answer mode of any keyset. Each keyset can
have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing
the ANS/RLS key or by lifting the handset.
1. AUTO ANSWER: After giving a short attention tone, the keyset will automatically answer calls
on the speakerphone. When a C.O. line is transferred to a keyset in Auto Answer mode, the
screened portion of the call will be Auto Answer, but the keyset will ring when the transfer is
complete if the user has not pressed the ANS/RLS key or lifted the handset.
2. VOICE ANNOUNCE: The keyset will not ring. After a short attention tone, callers can make an
announcement but the ANS/RLS key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 103
Display shows
[2
01] ANS MODE
RING MODE
2. Dial keyset number (e.g., 205)
OR
[205] ANS MODE
R
ING MODE
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All [ALL] ANS MODE
?
3. Dial 0, 1 or 2 to change ring mode
OR
[205] ANS MODE
V
OICE ANNOUNCE
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: All keysets = RING
Ring frequency default = 5
Related Items: MMC 111 Keyset Ring Tone