Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 733 (Page 1 of 2)
MMC: 733 AA PLAN TABLE
DCS
33
CI
77
CII
33
816
33
408i
77
408
77
Used to call up the customer-recorded and pre-recorded messages into plans compiled in MMC
732, AA Translation Table. Pre-recorded messages listed below can be applied and destinations
can be programmed as required. Specific ports are programmed in MMC 735, AA Use Table.
There are a total of 64 messages on an AA card:
- 48 messages are to be recorded by the user (01-48),
- 16 messages are pre-recorded in ROM on the card (49-64).
Options are as follows:
Dial Option Value Description
00 DAY MSG 01-64 Introduction message during Day Mode
01 NIGHT MSG 01-64 Introduction message during Night Mode
02 ALTER MSG 01-64 Emergency message
03 INVLID MSG 01-64 Message when an invalid digit is dialled
04 NO ANS MSG 01-64 Message when there is no reply from the
destination
05 XFER MSG 01-64 Transfer notifying message
06 BUSY MSG 01-64 Message on busy reply
07 NO STN MSG 01-64 Message on retrial
08 NO ACT MSG 01-64 Message on no action
09 CAMP ON On/Off Allow camp-on to busy extension
10 ANS DELAY 01-10 Answer Delay
11 RETRY CNT 0-5 No of times the AA will try to connect before routing
to final destination.
12 TRANS TABLE 01-12 Assigning associated TRANS TABLE
13 BUSY DEST Dest. Alternative destination on busy
14 NO ANS DEST Dest. Alternative destination on no answer
15 NO ACT DEST Dest. Default destination on no action
16 INVALID DEST Dest. Default destination on invalid action
There is a total of 12 tables (01-12) in the system, but not all tables have to be used.
DESTINATION : STATION, STATION GROUP, AA PLAN NO, REPEAT.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry