Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 502 (Page 1 of 2)
MMC: 502 STATION-WIDE TIMERS
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows certain station timer values to be changed on a per-station basis or for all stations. It is
not advisable to change these values without assistance from Technical Support.
0 NO ANS FWD This timer controls how long the station will ring before a Forward on
No Answer takes place. (Range: 001- 255 sec.)
1 DTMF DURATION This timer governs the duration of DTMF digit which is transmitted to
an external VM system port. It is useful for customising a voice mail
system. (Range: 100 - 9900 msec.)
2 FIRST DGT DELAY This timer is valuable for the system administrator to insert a suitable
delay for generating DTMF digits, for commencing in-band integra-
tion. (Range: 100 - 9900 msec)
Note: It is reasonable for the system administrator to use trial and error to find a suitable value for 1 and 2
above according to the characteristics of the selected VM system.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 502
Display shows
[2
01] NO ANS FWD
015 SEC →_
2. Dial station number (e.g., 205)
OR
Press UP or DOWN key to select station and press
RIGHT soft key
OR
Press ANS/RLS to select all stations and press RIGHT
soft key
[205] NO ANS FWD
015 SEC →_
OR
[ALL] NO ANS FWD
015 SEC →_
3. Enter new value (must be three digits) via dial keypad
(e.g., 020)
System will return to step 2
[205] NO ANS FWD
015 SEC →020
4. Dial timer number from above list (e.g. 1)
OR
Press UP or DOWN key to select and press RIGHT soft
key to move cursor
[205] DTMF DUR.
0100 MS →_
5. Enter new timer value (must be four digits, e.g. 0200)
System returns back to step 2
[205] DTMF DUR.
0100 MS →0200
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC