DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 712 (Page 1 of 2)
MMC: 712 LCR ROUTE TABLE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the completion of
an outgoing call. This table works in conjunction with LCR DIGIT TABLE, LCR TIME TABLE, LCR
COS TABLE and LCR MODIFIED DIGITS TABLE. After the user dials a valid digit string, the sys-
tem uses the LCR ROUTE TABLE to select a specific predetermined trunk group. A maximum of
16 routes are available beginning with ROUTE NUMBER 1. If more than one trunk group is avail-
able for call completion, the system uses the first designated trunk group and then starts to util-
ise succeeding trunk groups. If all trunk groups are busy in a selected route, call queue becomes
active and allocates trunks as they become available.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 712
Display shows
LCR ROUTE (0
1:1)
C:1 G:9 M:001
2. Dial LCR ROUTE index number 1–16 (e.g., 05)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
LCR ROUTE (0
5:1)
C:1 G:9 M:005
3. Dial TIME BAND index number 1–4 (e.g., 2)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
LCR ROUTE (05:2
)
C:1 G:NONE M:---
4. Dial LCR COS number 1–4 (e.g., 4)
OR
Press UP or DOWN to selected COS and press RIGHT
soft key to move cursor
LCR ROUTE (05:2)
C:4 G:NONE M:---
5. Dial TRUNK GROUP access code (e.g., 9)
OR
Press UP or DOWN to selected access code
and press RIGHT soft key to move cursor
LCR ROUTE (05:2)
C:4 G:9 M:---
6. Dial MODIFY DIGITS index number 001–100
(e.g., 050)
OR
Press UP or DOWN to selected index number
and press RIGHT soft key to move cursor
OR
Press RIGHT soft key to leave entry unchanged
LCR ROUTE (05:2)
C:4 G:9 M:050
LCR ROUTE (05:2)
C:4 G:9 M:---