Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 423 (Page 1 of 1)
MMC: 423 S/T MODE
DCS
33
CI
33
CII
33
816
33
408i
33
408
77
Used to select the function of each BRI access. You can set a BRI access as "TRUNK" to which
an ISDN C.O. line is connected, or as "STATION" to which an ISDN terminal is connected.
For each BRI access, two adjacent ports are assigned. You need only change the value for one
of the two ports; the value for the other port will be changed automatically.
Note: Any change made in this MMC will take effect only after restarting the BRI card. Use MMC 418, Card
Restart, to restart the card.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 423
Display shows
[7
01] S/T MODE
TRUNK
2. Dial BRI trunk number (e.g. 703)
OR
Press UP or DOWN key to select the port
Use the RIGHT soft key to position the cursor
under TRUNK (or STATION)
[703] S/T MODE
TRUNK
3. Press UP or DOWN key to make selection (TRUNK
or STATION)
Press RIGHT soft key to position the cursor under
the port number again
[7
03] S/T MODE
STATION
4. For other ports, repeat steps 2 and 3
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: TRUNK
Related Items: MMC 418 Card Restart
MMC 419 BRI Option
MMC 424 S0 Mapping