Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 110 (Page 1 of 2)
MMC: 110 STATION ON/OFF
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to set any of the following keyset features.
AUTO HOLD Automatically places an existing C.O. call on hold if a CALL key,
trunk key or trunk route key is pressed during that call.
AUTO TIMER Automatically starts the stopwatch timer during a C.O. call. (CALL
COST option, below, should be OFF for this feature to work.)
HEADSET USE When ON, this feature disables the hookswitch allowing a headset
user to answer all calls by pressing the ANS/RLS key.
HOT KEYPAD When ON, this feature allows the user to dial numbers on the keypad
without having to first lift the handset or press the SPEAKER key.
KEY TONE Allows the user to hear a slight tone when pressing keys on the key-
set.
PAGE REJOIN Allows the user to hear the latter part of page announcements if the
keyset becomes free during a page.
RING PREFER When OFF, requires the user to press the fast flashing button to an-
swer a ringing call after lifting the handset.
CALL COST If enabled (ON), LCD shows real-time call cost based on Metering
Pulses arrived. (See AUTO TIMER option.)
AME BGM Determines whether a station using Answering Machine Emulation
will hear their personal greeting or background music (BGM) while
callers are listening to the personal greeting. A BGM source must be
selected for this to work. (Cadence and SVMi-4 voice mail systems
only.)
AME PSWD Sets the Answering Machine Emulation password ON or OFF. (Ca-
dence and SVMi-4 voice mail systems only.)
NOT CONT.CID When ON, the keyset displays the call timer for the duration of an in-
coming trunk call (if AUTO TIMER is ON). When OFF, the CLIP num-
ber for a call is displayed for the duration of the call. (Not applicable
to 408 systems.)
Note: Keyset users can set or change these options for their own keyset (refer to the Samsung DCS Keyset
User Guide for details).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL