Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 412 [DCS / Compact II] (Page 1 of 1)
MMC: 412 ASSIGN TRUNK SIGNAL
DCS
33
CI
33
CII
33
816
77
408i
77
408
77
Allows for the assignment of AC15 cards for proper signalling. This MMC is only for analogue
types of AC15 trunks. These trunks can also use the translation tables in MMC 714, DDI Number
and Name Translation. The AC15 trunks are allowed the use of translation tables via MMC 416,
Assign AC15 Translation. The signalling condition types are as follows:
0 IMMEDIATE START
1 DELAYED START
2 WINK START
3 NO ANSWER BACK
4 DIRECT BACK
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1.
Open programming and select 412
Display shows
[7
01] TRK SIGNAL
IMMEDIATE START
2.
Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
[705] TRK SIGNAL
IMMEDIATE START
3. Enter desired trunk type selection from above list
OR
Press UP or DOWN key to make selection and press
RIGHT soft key
[705] TRK SIGNAL
WINK START
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: All AC15 trunks set to IMMEDIATE START
Related Items: MMC 714 DDI Number and Name Translation