Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 421 (Page 1 of 2)
MMC: 421 MSN DIGIT
DCS
33
CI
33
CII
33
816
33
408i
33
408
77
Provides a method of assigning an incoming MSN call to a specific station. If any entry in MSN
DIGIT TABLE matches an incoming call's called party number, either the specific station is
alerted, if it is programmed to accept the call, or the call is cleared if it is programmed to reject
the call.
If the incoming called party number does not have a matching entry in the MSN table, the opera-
tor is alerted.
You can give each MSN number to a specific station and you can select a call waiting option:
when a destination is busy, the incoming call must be cleared or camped-on to the station (which
is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the following fields:
DIGITS Digits to be received (maximum of 10).
DAY DEST Destination in day mode - can be a station or a station group.
Repeat (B) will be acceptable to the system if received digit is within
numbering plan for a station or station group.
.
NIGHT DEST Destination in night mode - can be a station or a station group.
Repeat (B) will be acceptable to the system if received digit is within
numbering plan for a station or station group.
CALL WAIT Toggles YES or NO: if YES then the call will be camped-on at busy
destination while NO gives busy indication.
OPTION Accept: the selected destination party will be alerted.
Reject: the call is cleared.
Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of the
two ports; the value for the other port will be changed automatically.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry