Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 116 (Page 2 of 2)
ACTION DISPLAY
1. Open programming and select 116
Display shows
[201] ALM REM(1)
HHMM: èNOTSET
2. Dial station number (e.g., 205)
OR
[205] ALM REM(1)
HHMM: èNOTSET
Press UP or DOWN to select station and press RIGHT
soft key to move cursor
OR
Press ANS/RLS to select all stations
[ALL] ALM REM(1)
HHMM: èNOTSET
3. Dial alarm number (e.g., 2)
OR
[205] ALM REM(2)
HHMM: èNOTSET
Press UP or DOWN to select alarm and press RIGHT
soft key to move cursor
4. Enter alarm time in 24-hour clock format
(e.g., 1300 for 1pm)
[205] ALM REM(2)
HHMM:1300èNOTSET
Display will automatically advance to step 5
5. Dial valid entry from above list for alarm type (e.g. 2,
DAILY)
[205] ALM REM(2)
HHMM:1300èDAILY
OR
Press UP or DOWN to select alarm type and press
RIGHT soft key to move cursor
6. Enter message using above method and press RIGHT
soft key to return to step 2
[205] ALM REM(2)
Meeting
7. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: Alarms set to NOTSET
Related Items: None