Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 507 (Page 1 of 1)
MMC: 507 ASSIGN AUTO NIGHT TIME
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Enters the system into night mode automatically by utilising time and day tables. A NIGHT key is
not needed as the system will switch automatically. (However, it is useful to have a dedicated key
so the status can be manually changed if necessary.) The start time is the time the system
switches from day to night service; the end time is when it switches back from night to day ser-
vice (e.g., start 1730 WED, end 0800 THUR).
All times are entered in 24-hour clock format (e.g. 1730 is 5.30pm).
FEATURE KEYS
0 SUN 4 THU
1 MON 5 FRI
2 TUE 6 SAT
3 WED
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 507
Display shows
NIGHT TIME (S
UN)
ST: END:
2. Dial day number (0–6 e.g., 3)
OR
Press UP or DOWN key to select day and press RIGHT
soft key to advance cursor
NIGHT TIME (W
ED)
ST: END:
3. Dial in start time for night (e.g. 1730)
If time entered is valid, cursor moves to end time
Enter end time (e.g. 0800)
If time entered is valid, system returns to step 2
NIGHT TIME (WED)
ST:1730 END:0800
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 722 Station Key Programming
MMC 723 System Key Programming