Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 400 (Page 1 of 1)
MMC: 400 CUSTOMER ON/OFF
PER TRUNK
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Assigns several options (listed below) on a per-trunk basis.
OPTIONS
0 1A2 EMULATE Trunk override call (NO PRIVACY)
1 TRUNK INC DND Allows trunk to override DND (DIL)
2 TRUNK FORWARD Allows trunk to be forwarded
3 LCR ALLOW Allows LCR to be switched ON/OFF when a
trunk is directly accessed.
Note: ‘1A2 Emulation’ means that a third party can be joined on an existing trunk conversation by pressing
the DTS key for the line on their keyset.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 400
Display show
[7
01] TRK ON/OFF
1A2 EMULATE:OFF
2. Dial trunk number (e.g. 704)
OR
Press UP or DOWN key to select trunk
OR
Press ANS/RLS for all trunks and press RIGHT soft key
to move cursor to options
[704] TRK ON/OFF
1A2 EMULATE:OFF
OR
[ALL] TRK ON/OFF
1A2 EMULATE :?
3. Dial option number from above list (0–3, e.g. 2)
OR
Press UP or DOWN key to select option and press
RIGHT soft key to move cursor
[704] TRK ON/OFF
TRK FORWARD :ON
4. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN key to select ON/OFF and press
RIGHT soft key to return to step 2
[704] TRK ON/OFF
TRK FORWARD: OFF
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: 1A2 EMULATE Off
TRUNK INC DND Off
TRUNK FORWARD On
LCR ALLOW Off
Related Items: None