Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 503 (Page 1 of 1)
MMC: 503 TRUNK-WIDE TIMERS
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows certain trunk timer values to be changed on a per-trunk basis or for all trunks. It is not ad-
visable to change these values (with the exception of trunk flash time) without assistance
from Technical Support.
TIMER RANGE DEFAULT DIAL
408/408i Other Systems
ANS.BAK TM 0100–2500 MSEC 0600 MSEC 00 00
CLEARING 0100–2500 MSEC 2000 MSEC 01 01
CO SUPV TM 0100–2500 MSEC 0400 MSEC 02 02
DTMF DURATION 0100–2500 MSEC 0100 MSEC 03 03
FIRST DGT DELAY 0100–2500 MSEC 0600 MSEC 04 04
FLASH TIME 0100–2500 MSEC 0070 MSEC 05 05
NO RING TM 001–255 SEC 004 SEC 06 06
PAUSE TIME 001–255 SEC 003 SEC 07 07
PRS DET TM 0000–2500 MSEC 0000 MSEC 08 08
RNG DET.TM 0100–2500 MSEC 0300 MSEC 09 09
WINK TIME 0100–0300 MSEC 0200 MSEC n/a 10
MF/DP INT TM 0100–9900 MSEC 0800 MSEC 10 11
MFR DLY TM 00–25 SEC 00 SEC 11 12
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 503
Display shows
[7
01] ANS.BAK TM
0600 MS →
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks and press RIGHT soft
key to move cursor
[704] A
NS.BAK TM
0600 MS →
OR
[ALL] A
NS.BAK TM
0600 MS →
3. Dial timer number from above list
OR
Press UP or DOWN key to select timer and press RIGHT
soft key to move cursor
[704] DTMF DUR.
0600 MS →_
4. Enter new timer value (must be four digits, e.g., 0700)
System returns to step 2
[704] DTMF DUR.
0600 MS →0700
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: See table above
Related Items: None