Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 605 (Page 1 of 1)
MMC: 605 ASSIGN EXTERNAL PAGE
ZONE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Determines which relays will close when one of the external page zones 5 to 8 is accessed. (816
and 408i/408 systems have only one external page zone—see below.)
DCS–The system must be equipped with a Trunk A card to allow external paging. Each Trunk A
card is equipped with two external page relays. The page relays have default DNs of 360X (e.g.
3601)
Compact II–One external page zone is located on the base board. Three are located on the op-
tional MISC card. The page relays have default DNs of 36x (e.g. 361)
816/408i/408–One external page zone (zone 5) is located on the base board. The page relay has
a default DN of 361. The optional port is 362 (see MMC 219).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 605
Display shows first page zone (Note: Member number
shows as 1 or 01 etc, depending on system)
EXT. PAGE ZONE:(5)
MEMBER 1:NONE
2. Dial page zone number (e.g., 6)
OR
Use UP or DOWN to select desired page zone numbers
and press RIGHT soft key to move the cursor
EXT. PAGE ZONE:(6)
MEMBER 1:NONE
3. Dial member number (e.g., 3 or 03)
OR
Use UP or DOWN to select member numbers
and press RIGHT soft key to move the cursor
OR
Press LEFT soft key to return to step 2
EXT. PAGE ZONE:(6)
MEMBER 3:NONE
4. Dial relay number via dial keypad (e.g., 362 or 3602)
and press RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3
EXT. PAGE ZONE:(6)
MEMBER 3:362
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 219 Common Relay Service Type