Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 703 (Page 1 of 1)
MMC: 703 TOLL ALLOWANCE TABLE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Makes toll restriction (call barring) easy and flexible. There are 500 entries for DCS (001–500),
200 entries for Compact II and 816 (001–200), and 100 entries for 408/408i (001–100) permitted
in the Allowance Table. Each entry index, up to 12 digits, can be assigned to a class of service.
With the use of wild cards (see MMC 704, Assign Wild Character), more flexibility can be built into
toll restriction. There are six toll levels, B to G, that are programmable. Toll level A is set as ‘unre-
stricted’ by default, and toll level H is set as ‘internal calls only’ by default.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
WILD CARD KEYS
Key No.
(Depends on keyset type)
Wild Card
19 (24B) or 7 (12B) or 1 (6B) X
20 (24B) or 8 (12B) or 2 (6B) Y
21 (24B) or 9 (12B) or 3 (6B) Z
ACTION DISPLAY
1. Open programming and select 703
Display shows
ALOW(0
01):BCDEFG
:000000
2. Dial entry number (e.g., 005)
OR
Press UP or DOWN key to select index and press
RIGHT soft key to move cursor and enter toll pattern
via dial pad (e.g., 212)
OR
Enter wild card (e.g., 21X) from above list and press
RIGHT soft key to move cursor to COS options.
ALOW(005):BCDEFG
:000000
ALOW(005):BCDEFG
212 :000000
ALOW(005):BCDEFG
21X :000000
3. Press UP or DOWN key to move cursor along line until
under toll class mark (e.g., E)
Enter a 1 for YES or 0 for NO and press RIGHT soft
key to return to step 1
OR
Press LEFT soft key to return to step 2
ALOW(001):BCDEFG
212 :000100
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: All entries are set to 0
Related Items: MMC 301 Assign Station COS
MMC 701 Assign COS Contents
MMC 702 Toll Deny Table
MMC 704 Assign Wild Character