Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 213 [DCS / Co mpact II] (Page 1 of 1)
MMC: 213 ALARM MESSAGE
DCS
33
CI
77
CII
33
816
77
408i
77
408
77
Allows the assignment of a name to an alarm sensor. Names are written using the dial keypad.
Each press of a key selects a character and moves the cursor to the next position. For example,
if the sensor name is “FIRE,” press the number “3” three times to get the letter “F.” Now press
the number “4” three times to get the letter “I", and so on to complete the name. Press the pro-
grammable ”A” key to toggle between upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper case and lower case text.
ACTION DISPLAY
1.
Open programming and select 213
Display shows (e.g. 351 for Compact II)
[3
51] ALARM NAME
2. Dial ALARM (e.g., 351 for Compact II or 3502
for DCS)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
[351] ALARM NAME
_
3. Enter name using method described above and
press RIGHT soft key to return to step 2
[351] ALARM NAME
FIRE!
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 212 Alarm Ringing Station