Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 807 (Page 1 of 1)
MMC: 807 VOLUME CONTROL
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the volume levels to be set the for the following keyset features:
KEY TONE NOISE THRES
SIDE TONE ALC THRES
HANDSET TX TX/RX THRES
MIC TX LEVEL TX/RX COMP
NOISE GUARD
Caution
You should only change these values under the supervision of Technical Support.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 807
Display shows
VOL.CONTROL:D
GP
KEY TONE VOL :1
2. Press RIGHT soft key to move cursor
VOL.CONTROL:DGP
KEY TONE VOL :1
3. Press UP or DOWN key to select feature (e.g. SIDE
TONE VOL) and press RIGHT soft key
VOL.CONTROL:DGP
SIDE TONE VOL:1
4. Press UP or DOWN key to select volume and press
LEFT soft key
VOL.CONTROL:DGP
SIDE TONE VOL:2
5. Repeat step 3 to select and change other volume levels
OR
Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Key tone vol 1 Noise thres. 1
Sidetone vol 1 Alc thres. 7
Handset tx 3 Tx/rx thres. 3
Mic tx level 3 Tx/rx comp. 5
Noise guard 8
Related Items: None