Filter
Top Products
DCS SPECIAL APPLICATIONS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
3–5
CLIP
(Calling Line Identification Presentation)
Hardware Provisions
ISDN trunk cards.
Software Provisions
The MMCs related to CLIP are listed below with a short description of their uses. They are listed
in the recommended order in which they should be programmed. This sequence is suggested
so that the installer/technician gets a better understanding of how the feature works. There is no
technical reason to strictly follow this sequence.
l MMC 312
(ALLOW CLIP)
Used to determine which keysets are allowed to re-
ceive CLIP displays.
l MMCs 722 and 723
(STATION & SYSTEM KEY
PROGRAMMING)
It is strongly recommended that all keysets allowed
CLIP in MMC 312 are programmed with a CLIP key
using this MMC.
l MMC 728
(CLIP TRANSLATION TABLE)
Allows for the creation of a list of names that corre-
spond to numbers received from the Central Office
(C.O.). These names will be displayed when a call
rings in that has NUMBER ONLY data provided by the
C.O.
l MMC 725
(SMDR OPTIONS)
Provides the ability to print CLIP data and abandoned
calls on the Station Message Detail Recording
(SMDR) report.
l MMC 119
(SET CLIP DISPLAY)
Station users can determine what CLIP data is dis-
played when a call rings at the user’s station.
l MMC 501
(SYSTEM-WIDE TIMERS)
You may need to adjust the CLIP DISPLAY timer. This
is the length of time that CLIP data is displayed at us-
ers’ stations after the CLIP key is pressed.
l MMC 415
(REPORT TRUNK ABANDON
DATA)
Used to determine which trunks will record data in the
Call Abandon list and print with an Abandon “A” flag
on the SMDR report.
l MMC 608
(ASSIGN CLIP REVIEW BLOCK)
Used to assign CLIP Review blocks to keysets to al-
low the user to review CLIP data for previous calls
.
l MMC 701
(ASSIGN COS CONTENTS)
All CLIP features are included in this MMC so that the
system installer can allow or deny them.
l MMC 724
(DIAL NUMBERING PLAN)
CLIP features are included in this MMC to al
low the
system installer to assign an access code where nec-
essary.