Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 707 (Page 1 of 1)
MMC: 707 AUTHORISATION CODE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows you to set up authorisation codes on a per-class of service basis. Number of available en-
tries is:
DCS: 250 (001–250)
Compact I & II: 100 (001–100)
816: 30 (01–30)
408/408i: 10 (01–10)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 707
Display shows
AUTHOR.CODE(0
01)
CODE: COS:01
2. Dial code entry number (see above) including any
leading zeros (e.g., 05 or 005)
OR
Press UP or DOWN key to selected index number and
press RIGHT soft key to move cursor
AUTHOR.CODE(0
05)
CODE: COS:01
3. Enter authorisation code (maximum four digits) via dial
keypad (e.g., 1234) and press RIGHT soft key to move
cursor
AUTHOR.CODE(005)
CODE:1234 COS:01
4. Enter class of service number 01–30 (e.g., 05)
OR
Press UP or DOWN key to select COS and press RIGHT
soft key to select and return to step 2
AUTHOR.CODE(005)
CODE:1234 COS:05
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 305 Assign Forced Code