Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 501 (Page 3 of 6)
PARK RECALL 45 SEC 0–255 SEC
PC-MMC LOCK (not 408) 5 MIN 1–60 MIN
POWER DOWN 2000 MS 1000–9900 MS
RECALL DISCONECT 2 MIN 1–255 MIN
RECALL WAIT 15 SEC 1–255 SEC
SMDR START/DP 30 SEC 1–255 SEC
SMDR START/DTMF 15 SEC 1–255 SEC
SYS HOLD RECALL 45 SEC 0–255 SEC
TRANSFER RECALL 20 SEC 0–255 SEC
UCDS AUDIO ALARM (not 408/408i) 0 SEC 0–255 SEC
UCDS VISUAL ALARM (not 408/408i) 0 SEC 0–255 SEC
VMS UCD MSG (816 only) 5 SEC 1–99 SEC
VOICE DIAL DELAY (not 816 or 408/408i) 8 SEC 5–15 SEC
R/D RING ON (not used) – –
R/D SIGNAL ON (not used) – –
PERI UCD REPORT (not 408/408i) 5 SEC 3–99 SEC
Timer Descriptions
AA INT DGT: Controls the grace period between dialling valid digits before transferring call to INVLID
DEST as set in MMC 733 on a per-plan basis.
AA NO ACT: Time AA will wait for first digit for processing, after which call is transferred to the desti-
nation set in NO ACT DEST in MMC 733.
AA TRANS: After this time, compare input digit with AA translation table (MMC 732) and transfer to
destination.
ALERT TONE: Sets the duration of the attention tone preceding a call to a keyset in the Voice An-
nounce or Auto Answer mode. This tone also precedes a forced Auto Answer call.
ALM REM INTERVAL: Controls the time between ring attempts at a station when alarm reminder is
set.
ALM REM RING OFF: Controls the length of the ring cycle when alarm reminder is set at a station.
ATT RECALL: The length of time a transfer recall will ring at a station before recalling the operator.
AUTO REDIAL INT: Controls the time between attempts after RETRY dialling is set on a station.
AUTO REDIAL RLS: Controls the duration of a Ring No Answer condition on a retry number dialled
before the auto redial is automatically cancelled.
BARGE-IN TONE INT: Controls the interval between the tones sent to the station being barged in
on.
CALLBACK NO ANS: Controls the time before the callback is automatically cancelled when a call-
back detects Ring No Answer.
CAMP ON RECALL: Controls how long a camped-on call will stay at a destination before recalling to
the transferring station.