Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 506 (Page 1 of 2)
MMC: 506 TONE CADENCE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Sets and changes tone cadences on a system-wide basis. There are 14 tones available, as listed
below. Tones can be set to ‘interrupt’ or ‘continuous’, and interrupt tone cadences can be cus-
tomised. Some systems may require default settings to comply with local operating companies.
FEATURE KEYS
DIAL 0 INTERRUPT TONE
DIAL 1 CONTINUOUS TONE
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
TONES
BUSY TONE Busy tone
CONFM/BARGE Confirm tone and Barge-in tone
DIAL TONE Dial tone
DND/NO MORE DND tone and No More Call key tone
ERROR TONE Error tone
HOLD/CAMPON Hold tone and Camp-on tone
MSGWAT TONE Message waiting tone
RGBACK TONE Ringback tone
RING TONE Ring over page tone (to external page port)
TRSFER TONE Transfer dial tone
DID RNGBACK
AC15 ringback tone (not 408 systems)
CO BUSY CO Busy tone
CO RINGBACK CO Ringback tone
CO DIAL CO Dial tone
ACTION DISPLAY
1. Open programming and select 506
Display shows
B
USY TONE
INTERRUPT TONE
2. Press UP or DOWN key to select tone (e.g. TRSFER)
and press RIGHT soft key
TRSFER TONE
INTERRUPT TONE
3. Dial 0 for INTERRUPT tone or 1 for CONTINUOUS
tone
OR
Press UP or DOWN key to select and press RIGHT soft
key