Filter
Top Products
DCS SPECIAL APPLICATIONS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
3–14
is no relationship or restriction between the dial sending mode of the terminal and the ISDN
TRK. (DATA calls must use an ISDN TRK.)
Routing an incoming call to the terminals attached to LT-S port
Incoming calls are routed according to the properties of the selected TRK. Routing is con-
trolled by the MMC tables. You can put a terminal number into the DDI, MSN or TRUNK
RING table as a destination, with or without a wild card digit. You can then answer the in-
coming call from the terminal.
Features Reference Tables
Tables 7 and 8 explain briefly which system features are applicable to ISDN cards.
Related Timers
Feature Implemented Note
ATT Recall Time YES You can check the version of BRI or
PRI
C.O. - C.O. Disconnect NO Only for analogue trunk
Dial Pass Time NO Only for analogue trunk
DISA Disconnect NO Only for analogue trunk
DISA Lock Out Timer NO Only for analogue trunk
DISA Pass Check NO Only for analogue trunk
First Digit Time
Inter Digit Time
Overlap Inter Digit YES Inter Digit time in overlap send-
ing/receiving
Table 7 – Related DCS timers
Note: These values can be changed in MMC 501 or 503.
PRI and BRI LT-T Port
Call feature capability
Feature Implemented Note
Transfer
NO
Transfer to remote user through ISDN TRK is
not allowed
Conference YES
Conference with remote user through ISDN
TRK
Forward YES
External Forward - forward to remote user
through ISDN TRK
SMDR YES
SMDR report of the calls through ISDN TRK
port
Toll Check YES Toll check through ISDN TRK port
DISA YES Use an ISDN TRK as DISA outgoing line
Table 8 - Call feature abilities of PRI & BRI LT-T