Filter
Top Products
Voicemail Pro Page 271
15-601063 Issue 20l (03 March 2009)IP Office
Voicemail Pro Actions: Miscellaneous Actions
6.8.5 Post Dial
The Post Dial action can be used to connect another extension to a specified call flow start point or to play a
recording to that extension.
To add a Post Dial action:
1.Click the Miscellaneous Actions icon and select Post Dial.
2.In the Specific tab, complete the fields with relevant details.
· Post wave file
Plays a selected wav file. When Post wave file is selected there are two options which can be selected.
· Play out a looped wave file
The wav file will be played in a continuous loop.
· Delete the wave file after completion
The wav file will be deleted after it has been played.
· Post the following action
Enter the name of the required start point or use the browse button to select the start point. To play a recording,
enter c:\mywavs\hello.wav (substitute the appropriate file path and file name for the .wav file you want played).
· To extension
Enter or select the extension to which the call should be made. The voicemail server will attempt to make the call
every 5 minutes for the next hour until successful.
· Page Calls
The Post Dial action can be used to page a .wav file to an extension number, including group extension numbers.
This is done by entering PAGE: followed by the target extension number. In this case the wav file will not loop if
selected.
Connect the result Next to a relevant action.